X-POWER 100
Immersion centrifugal cleaner
Using compressed air as power, the machine is a new style and high performance pneumatic stencil cleaner. Put stencil and misprinted boards into cleaning room, after adjust cleaning and dry time, push the turn-on button; the boards will be cleaning and drying automatically. When the setting-up time is end, the machine will stop. Time and program will reset when open the door. It’s very convenient to operate and ensure cleaning effect, as well as improve the production efficient.
The cleaning liquid is cyclic utilization inside the machine, and it will reduce consumption and cost. Also, the work time will reduce, and prevent the damage to people because of workers don’t need to touch liquid. This machine use high air pressure as energy. Don’t need any electric any more. So the safety promotes greatly. Both solvent type and water-based cleaning agents can be used in the machine .
The cleaning liquid is cyclic utilization inside the machine, and it will reduce consumption and cost. Also, the work time will reduce, and prevent the damage to people because of workers don’t need to touch liquid. This machine use high air pressure as energy. Don’t need any electric any more. So the safety promotes greatly. Both solvent type and water-based cleaning agents can be used in the machine .
Features
- Used for cleaning solder paste, glue, etc.
- Equipped with high precision filtering system
- Liquid and pump pressure gauge can be displayed by panel
- Cleaning count feature that automatically aggregate cleaning number of stencil.
- Cleaning pressure can be adjusted independently, any material suitable for stencil.
- Special design on air exhaust can reduce cleaning chemistry consumption
- Stainless steel cabinet with good reliability and can resist any hurt by acid and alkali cleaning chemistry.
Specification
| Parameter | |
|---|---|
| Stencil size | MAX 750mm(L) ×750mm(W) × 40mm(H) |
| Content of cleaning tank | 40L |
| Cleaning principle | 360°rotary spray and dry |
| Cleaning time | 2-5MIN |
| Dry time | 2-5MIN |
| Air supply | 0.45Mpa ～ 0.7Mpa |
| Filter model | three rank filter |
| 1st | 10μm |
| 2ed | 5μm |
| 3rd： 1μm | 1μm |
| Net weight | 300kg |
| Machine size | 1000mm(L) ×750mm(W) × 1750mm(H) |
Application
- Solder paste stencil
- Glue mask
- Misprint PCB
- Solder paste squeegee
